Sper-scientific 850039 Conductivity TDS Meter - Datalogging Instrukcja Użytkownika Pobierz pdf (Strona 8)

- 8 -

4-F. Temperature Unit Default Setting

 Press the SET (8) button as needed to reach the "temp. unit"

screen.

 Use the ▲ (5) and ▼ (6) buttons to switch between °F and °C.

Press the ENTER (4) button.

 Press the SET (8) button to advance to the next option, or press the ESC

(3) button to exit.

4-G. Temperature Compensation Factor (ATC) Default Setting

The ATC Factor is adjustable between 0 to 5.0% per °C.

 Press the SET (8) button as needed to reach the

"Temp. Comp." screen.

 Use the ▲ (5), ▼ (6), and SEND (7) buttons to set the

ATC Factor.

 Press the ENTER (4) button to save the settings.

 Press the SET (8) button to advance to the next option, or press the ESC

(3) button to exit.

4-H. Conductivity (uS, mS), TDS (PPM) Default Setting

 Press the SET (8) button as needed to reach the "CD/TDS"

screen.

 Use the ▲ (5) and ▼ (6) buttons to switch between uS, mS and PPM.

 Press the ENTER (4) button.

 Press the SET (8) button to advance to the next option, or press the ESC

(3) button to exit.

4-I. Escape from Advanced Adjustments

For the above procedures, press the ESC (3) button before pressing the EN-

TER (4) button to exit advanced adjustments without saving the changes.

5. UPLOADING DATA FROM THE METER

(Auto data logging readings only—manual readings cannot be upload-

ed)

To upload the data to a computer, connect the RS232 cable and run the soft-

ware (see page 11). You can only send one memory block at a time.

 First, cancel the hold and record functions if they are activated.

 Press the SEND (7) button for at least 2 seconds until the bottom right dis-

play shows "Transmit Mode."

 Release the button.

 The following screens flash alternately:

1=PPM

0=uS, mS

Temp. Comp.

^, v SEND(→)

1=°F

0=°C

1 2 3 4 5 6 7 8 9 10 11 12

Komentarze do niniejszej Instrukcji

Brak uwag

Sper-scientific 850039 Conductivity TDS Meter - Datalogging Instrukcja Użytkownika Strona 8

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia pomiarowe Sper-scientific 850039 Conductivity TDS Meter - Datalogging